Highpoint RocketRAID 2320 User Manual download pdf (Page 32)

Press Enter to use the default value (the maximum capacity for the array), or

specify the desired value using the keyboard, and press Enter to confirm this

selection. Then, click the Finish button.

Note: If you have specified an initialization option, the initialization process will

start automatically. A progress bar will be displayed towards the bottom of the

interface window, and will indicate % completion, and provide an estimate of the

time needed to complete the initialization procedure.

Single RAID - Cross Adapter

The term “Single RAID - Cross Adapter” refers to the RocketRAID 2320 ability to

create RAID arrays between drives attached to multiple RocketRAID 2320 Adapters.

Each Cross Adapter array can support up to 16 hard disks.

Cross-Adapter arrays are created in the same manner as standard arrays. The

Creation menu will display disks attached to each RocketRAID 2320 adapter installed

into the system.

4 - Deleting an Array

To delete an array:

Highlight the “Management” menu, then select the “Array Management” function.

Highlight the array you want to delete, then click on the “Delete Icon” or select the

Delete command from the “Operation” menu.

A warning message will appear. Click Yes to delete the array. Click on cancel to stop

this procedure.

Note: An array in use by the operating system cannot be deleted. Any data stored on

a deleted array will be inaccessible.

RocketRAID 2320 Driver and Software Installation

4-10

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 76 77

No comments

Highpoint RocketRAID 2320 User Manual Page 32