Highpoint RocketRAID 2640X1 User Manual download pdf (Page 19)

RocketRAID BIOS Utility

The utility will display a warning message. Press Y (yes) to delete the array, or select

N (no) to cancel.

Warning: all data stored on the array will be lost – do not delete if the array contains

critical data.

4 - Adding/Remove Spare Disks

This Add/Remove Spare command is used to assign a hard disk to act as a Spare

Disk. Spare Disks are used to automatically rebuild Redundant RAID arrays (RAID 1,

5, 10) in the case of disk failure. As with creating RAID arrays, disks must be initial-

ized before they can be used as spares. To set a hard disk to act as a Spare Disk, use

the arrow keys to select the target disk from the list of initialized disks, and press

Enter. To remove the Spare Disk setting from a hard disk, highlight the spare disk, and

press Enter.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

No comments

Highpoint RocketRAID 2640X1 User Manual Page 19