Highpoint RocketRAID 2640X1 User Manual download pdf (Page 16)

RocketRAID BIOS Utility

Highlight the target disks using the arrow keys, then select using Enter. A numeral

will be displayed before each selected disk. Once all target disks have been selected,

press ESC. The utility will display a warning, and ask you to press Y (yes) to initialize,

or N (no) to cancel. Once initialized, these disks can be used to create RAID arrays.

Warning: Initialization will destroy all pre- existing data on the selected hard

disks. Only initialize disks that do not contain critical data.

Creating Arrays:

Select Create from the toolbar and press Enter.

1. Use the arrow keys to select the RAID level and press ENTER.

2. Use the arrow keys to highlight the Array Name option and press Enter. The

array name dialogue box will appear. Use the keyboard to input a new Array

Name, and press the Enter key.

Note: the Array Name command is optional – it is not necessary to name the array.

The array can be named at a later time, and the name of the array can be changed

at any time. On the Create menu, use the arrow keys to highlight the Select Devices

item and press Enter. A device list will appear, and display all available hard disk

drives.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

No comments

Highpoint RocketRAID 2640X1 User Manual Page 16