Highpoint RocketRAID 4311 User's Guide download pdf (Page 20)

RocketRAID BIOS Utility

You will be asked to enter the Supervisor password.

The default password is “hpt”.

BIOS Commands

System

User/Supervisor modes – interface modes

Change password - for Supervisor mode

Exit the utility – quit and exit the RocketRAID BIOS utility

Disk

Information – displays information about the select hard disks

Initialize – initialize the selected disks (required in order to use new hard disks for

creating RAID arrays, disk replacement, or configuring spare disks.

Toggle Spare – configure spare disks.

Unplug – remove the selected disks (hot-swap)

Turn on write cache – enable write cache for the selected disks

Turn off write cache – disable write cache for the selected disks

Rescan – prompts the RocketRAID card to scan for new hard disks.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

No comments

Highpoint RocketRAID 4311 User's Guide Page 20