Highpoint RocketRAID 4322 User's Guide download pdf (Page 29)

RocketRAID BIOS Utility

Controller Settings

Highlight Controller from the toolbar, select Settings and press Enter.

Use the tab and arrow keys to select each item, and the Spacebar to enable/disable

the target option.

• Enable Audible Alarm – enables/disables card’s alarm (beeper)

• Enable Staggered drive spinup – enable/disable staggered drive spin-up. Dis-

abled by default. If enabled, the host adapter will spin disks in sequence (one

disk, every “x#” of seconds – enter the desired value). Some hard disks do not

support this setting – consult the hard disk’s documentation for more

information.

• Spin down idle disk – If enabled, the host adapter will power down idle (inactive)

disks/arrays based on the allotted time. Specify the value (in minutes)

• Rebuild Priority – This option is provided for redundant arrays. This setting

determines the priority of rebuilding arrays in regards to other system tasks.

• Provide INT13 support – enable or disable INT13 (the host adapter’s boot

function). Disabling this setting may resolve motherboard BIOS related issues in

cases where the card cannot be loaded into memory properly (option ROM/out of

memory errors).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

No comments

Highpoint RocketRAID 4322 User's Guide Page 29